Siding permits in Madison, WI
A Madison siding permit covers vinyl, fiber cement, steel and LP re-side, including housewrap and trim. Save your license, insurance and bond details once, then produce the completed application — plus the attachments this jurisdiction expects — in under a minute.
Who pulls the siding permit in Madison
The contractor of record pulls the permit. Where Wisconsin allows it, an owner-builder can pull it directly by signing the owner-builder affidavit — the app swaps the contractor block for that disclosure automatically.
Where Madison siding permits are reviewed
Files with
Madison Building Inspection Division
Online portal: Development Services Center
Plan review and permitting run through the city's Development Services Center under the state Uniform Dwelling Code.
The Dane County siding packet
Generated by the same engine the app uses — these are the forms this scope actually triggers here, not a generic list.
Siding / exterior cladding in Dane County
4 documents on a $12,000 job.
- Siding / Exterior Cladding Permit
Siding / exterior cladding permit application.
- OSHA Fall Protection Plan
Jobsite safety plan kept on site for inspection.
- Client Project Proposal
Signed scope and price for the homeowner file.
- EPA Lead-Safe RRP Record (Pre-1978 Homes)
EPA RRP rule (40 CFR 745) — pre-1978 homes are the norm in this market, so firm certification, Renovate Right delivery and containment must be documented.
- Document whether the existing cladding is torn off; most Midwest departments inspect the weather-resistive barrier and flashing before the new siding is closed in.
- Wisconsin requires a Dwelling Contractor Qualifier credential and a Dwelling Contractor certification to obtain a one- and two-family permit — the credential numbers belong on the application.
- Wisconsin UDC applies to work on dwellings built after 1980; older homes follow the local ordinance — confirm which code cycle your municipality enforces.
Why Madison siding applications get kicked back
The most common cause is no EPA Lead-Safe RRP record attached on a pre-1978 home, which stops the application at intake. Because the application is generated from your saved shop profile and the job scope, that field is populated before it ever reaches the counter.
What a Madison siding permit costs
A planning range for this trade — adjust the contract value to match the job.
Use the full contract amount — labor and materials. Under-declaring is the fastest way to a stop-work order.
Estimated Madison permit cost
$222 – $530
Modelled range, not a quote from the Madison building department.
- Building permit feeCalculated from a declared job value of $16,000.$222 – $530
Method: valuation-based lines follow the stepped ICC/UBC Table 1-A progression that most residential schedules are still derived from, widened to reflect how much neighboring jurisdictions differ. Confirm the exact figure with the office listed on this page before you put it in a bid.
Inspection sequence
- Weather-resistive barrier / lath
- Final
Never cover work ahead of the inspection that covers it — a re-open is the most expensive avoidable cost on a siding job.
What each Madison inspector checks, step by step →Get the Madison siding permit checklist
One page covering the forms, attachments and inspection sequence Madison siding crews get held up on.
No account required. One email, unsubscribe any time.
Other trades in Madison
General guidance for Madison siding contractors, not legal advice. Confirm requirements and fees with the authority having jurisdiction.