Roofing permits in Jacksonville, FL
A Jacksonville roofing permit covers tear-off, re-cover and full roof replacement, including underlayment, secondary water barrier and flashing. Save your license, insurance and bond details once, then produce the completed application — plus the attachments this jurisdiction expects — in under a minute.
Who pulls the roofing permit in Jacksonville
The contractor of record pulls the permit. Where Florida allows it, an owner-builder can pull it directly by signing the owner-builder affidavit — the app swaps the contractor block for that disclosure automatically.
Where Jacksonville roofing permits are reviewed
Files with
City of Jacksonville Building Inspection Division
Online portal: JaxEPICS
Consolidated city-county government means this division covers essentially all of Duval County, with online submission for every permit type.
The Duval County roofing packet
Generated by the same engine the app uses — these are the forms this scope actually triggers here, not a generic list.
Re-roof / roof replacement in Duval County
6 documents on a $12,000 job.
- Re-Roof / Tear-Off Permit
Primary roofing permit application.
- FL Product Approval / Miami-Dade NOA Sheet
Florida Product Approval / Miami-Dade NOA sheet for every roofing component.
- Wind Mitigation / Roof-to-Wall Affidavit
Wind mitigation affidavit — required for close-out and used by the owner for insurance credits.
- Notice of Commencement (FL 713.13)
Florida Statute 713.13 — recorded Notice of Commencement required over $2,500.
- OSHA Fall Protection Plan
Jobsite safety plan kept on site for inspection.
- Client Project Proposal
Signed scope and price for the homeowner file.
Why Jacksonville roofing applications get kicked back
The most common cause is missing or mismatched product approval / evaluation report numbers for the shingle, underlayment and fastener system. Because the application is generated from your saved shop profile and the job scope, that field is populated before it ever reaches the counter.
What a Jacksonville roofing permit costs
A planning range for this trade — adjust the contract value to match the job.
Use the full contract amount — labor and materials. Under-declaring is the fastest way to a stop-work order.
Estimated Jacksonville permit cost
$249 – $624
Modelled range, not a quote from the Jacksonville building department.
- Building permit feeCalculated from a declared job value of $14,000.$199 – $474
- Re-inspection (if the first fails)Charged per return trip, so one missed dry-in call costs more than the permit.$50 – $150
Florida adds two statewide surcharges (DBPR and the Building Code Administrators fund) on top of the local fee, each a small percentage of the permit with a minimum dollar amount.
Method: valuation-based lines follow the stepped ICC/UBC Table 1-A progression that most residential schedules are still derived from, widened to reflect how much neighboring jurisdictions differ. Confirm the exact figure with the office listed on this page before you put it in a bid.
Inspection sequence
- Dry-in / in-progress
- Nailing pattern (where required)
- Final roof
Never cover work ahead of the inspection that covers it — a re-open is the most expensive avoidable cost on a roofing job.
What each Jacksonville inspector checks, step by step →Get the Jacksonville roofing permit checklist
One page covering the forms, attachments and inspection sequence Jacksonville roofing crews get held up on.
No account required. One email, unsubscribe any time.
Other trades in Jacksonville
Roofing permits in other Florida metros
General guidance for Jacksonville roofing contractors, not legal advice. Confirm requirements and fees with the authority having jurisdiction.